Low Profile Range

The Low Profile Range offers self-tapping, screw and adhesive fix clips for mounting wall panels that require less space between panel and substrate. Available in 5-15kg pull out loads depending on the male clip used. The Low Profile Range is ideal for mounting wall panels, with female clips specifically designed to self-tap into curved substrates, drywall and MDF or foam core. Common uses: mounting decorative wall panels to drywall substrates, curved panels to curved walls, and non-upholstered panels to walls.

Download CAD files

LP-M8A Low Profile clip - self tapping male

Male self tapping low profile clip for plywood and MDF type boards. Mounts into LP-F8 and LP-DF8. 5 kg pull out load per clip. Screws into 10mm hole with CT-09. Install with CT-10.

LP-SM8As Low Profile clip - surface mount male

Male low profile surface mount clip with SuperGroove base for thinner panels. Mounts into LP-F8 and LP-DF8. 5 kg pull out load per clip. Screw fix with countersink 4 gauge screw or fix with Fastmount Supergroove Adhesive or other suitable epoxy glue. No special tools required for installation.

LP-SMX Low Profile surface mount male heavy duty - 15kg

Male low profile extra heavy duty surface mount clip for heavy panels. Mounts into LP-F8 and LP-AF8A. 15kg pull out load per clip. Screw fix with 3 x countersink #6 type screws. No special tools required for installation.

LP-F8 Low Profile clip - self tapping female

Female low profile self tapping clip for use with plywood and MDF type boards. Compatible with male clips LP-M8 and LP-SM8. Install with CT-19 into 25-25.4mm hole.

LP-DF8 Low Profile clip - self tapping coarse thread female

Female low profile self tapping clip with coarse thread for use with drywall plasterboard and soft core material. Compatible with male clips LP-M8 and LP-SM8. Install with CT-19 into 25mm hole.

LP-AF8A Low Profile Auto fit female

Female low profile push fit clip with lateral adjustment designed for use with curved panels. Compatible with male clips LP-M8 and LP-SM8. Screw fix or fix with Fastmount Supergroove Adhesive or other suitable epoxy glue into pre-drilled 35mm hole.

CP-08ST Low Profile Clip center point - Steel tip

Low Profile center point with stainless steel tip to mark harder panel materials for correct clip alignment. Fits into LP-F8 and LP-DF8. See install guide.

CT-01 10mm Drill carbide tipped

For use with the Standard Profile and Low Profile ranges. For drilling through panel and creating pilot hole for CT-07. See install guides and video for correct use.

CT-09 10mm Forstner type drill carbide tipped

For use with Standard Profile, Low Profile and Metal ranges. For drilling blind holes into the back of panels. See install guides and video for correct use.

CT-10 Install tool self tapping male clips

For use with Standard Profile, Low Profile and Panel Control range. Use to install self tapping male PC-M1B, PC-M2H, PC-VM1, PC-VMX, PS-150 and LP-M8 with battery drill on correct torque setting. See install guides and videos for correct use.

CT-19 Install tool Low Profile range (aluminium)

For use with Low Profile range. Aluminium install tool for female clips LP-F8 and LP-DF8 with battery drill on correct torque setting. Ideal for large quantity installations. See install guides and video for correct use.

CT-20 Install tool Low Profile range (plastic)

For use with Low Profile range. Plastic moulded install tool for female clips LP-F8 and LP-DF8 with battery drill on correct torque setting. For standard use. See install guides and video for correct use. Designed for a maximum of 20 clip installations only. For more than 20 clips use the CT-19.

CT-05 Panel removal tool

Stainless steel tool for removing upholstered panels. Not for use with painted panels.

CT-17 Panel removal tool painted panel (glass sucker 40kg)

Glass suction cup for removal and handling of painted and pre-finished panels. Two glass suckers required for controlled panel removal.

LP-08Y Yard Kit Low Profile

Installation and panel removal tools for Low Profile range. Contains CT-05, CT-09, CT-10 and CT-19.

CT-09DG Drill gauge for CT-09 drill bit

Drill Gauge for use with CT-09 drill bit. Designed for depth control when blind drilling for Standard and Low Profile range male clips. Machined aluminium housing, anodised red for durability. NOTE: Sold separately to CT-09.

CT-22 Tap for male clips in Standard and Low Profile ranges

New product for tapping thread into hard materials for male clips, PC-M1B, PC-M2H, PC-VM1, PC-VMX, LP-M8A, MC-M5, PS-150, PS-150E (self tapping male end).

CT-05H Panel Removal Tool with hook

Dual purpose reinforced stainless steel tool with fold down hook for use with lacquered and/or textured panels.