Installation tools

To achieve a quality installation with perfect finish, use the appropriate installation and removal tools for the different clip ranges

Download CAD files

CP-01ST Standard Center Point - red plastic stainless steel tip

Standard Profile center point with stainless steel tip to align holes in panel and frame for correct clip alignment. Fits 10mm blind hole in panel drilled with CT-09; or into PC-F1A, PC-SF1, PC-RF1 and PC-AF1; also into SL-FA, SL-SFA and SL-FB from the Stratlock Range. See install guide.

CP-08ST Low Profile Clip center point - Steel tip

Low Profile center point with stainless steel tip to mark harder panel materials for correct clip alignment. Fits into LP-F8 and LP-DF8. See install guide.

VL-CP3 Very Low profile center point

Very Low Profile centre point with stainless steel tip to mark hole centre in panel for correct clip alignment. Fits into both VL-F3 and VL-M3. See install guide.

MC-CP5 Metal Clip Centre point

Metal Clip range centre point with stainless steel tip to mark hole centre in panel for correct clip alignment. Fits into MC-F5. See install guide.

TC-CP6H Textile Range TC-F6H center point

Textile Range TC-F6H centre point with stainless steel tip to mark hole centre in panel for correct clip alignment. See install guide.

VL-SS3 Very Low Profile stainless steel screw

Custom type 303 stainless steel screw for fixing VL-03 and VL-03H clips into panels as thin as 5.5mm. Pozi drive head.

CT-09DG Drill gauge for CT-09 drill bit

Drill Gauge for use with CT-09 drill bit. Designed for depth control when blind drilling for Standard and Low Profile range male clips. Machined aluminium housing, anodised red for durability. NOTE: Sold separately to CT-09.

CT-01 10mm Drill carbide tipped

For use with the Standard Profile and Low Profile ranges. For drilling through panel and creating pilot hole for CT-07. See install guides and video for correct use.

CT-09 10mm Forstner type drill carbide tipped

For use with Standard Profile, Low Profile and Metal ranges. For drilling blind holes into the back of panels. See install guides and video for correct use.

CT-07 Step drill carbide tipped

For use with Standard Profile clip PC-F1A. Tungsten tip drill with 16.8mm diameter for drilling 10mm hole in frame. See install guides and video for correct use.

CT-13A 16.8mm one step drill carbide tipped

For use with Standard Profile clip PC-F1A. Carbide tip drill with 16.8 diameter for drilling holes into fibreglass, carbon fibre and kevlar laminates. See install guides and video for correct use.

CT-15 Thread tap for PC-F1A

For use with Standard Profile clip PC-F1A. Tap tool for tapping thread to fit PC-F1A into fibreglass, aluminium or similar. Either drill hole with CT-13A or drill out 10mm hole with CT-07 then tap with CT-15. See install guides and video for correct use.

CT-22 Tap for male clips in Standard and Low Profile ranges

New product for tapping thread into hard materials for male clips, PC-M1B, PC-M2H, PC-VM1, PC-VMX, LP-M8A, MC-M5, PS-150, PS-150E (self tapping male end).

CT-03 Install tool for PC-F1A

For use with Standard Profile clip PC-F1A. Use to install self tapping female PC-F1A with battery drill on correct torque setting. See install guides and video for correct use.

CT-10 Install tool self tapping male clips

For use with Standard Profile, Low Profile and Panel Control range. Use to install self tapping male PC-M1B, PC-M2H, PC-VM1, PC-VMX, PS-150 and LP-M8 with battery drill on correct torque setting. See install guides and videos for correct use.

CT-19 Install tool Low Profile range (aluminium)

For use with Low Profile range. Aluminium install tool for female clips LP-F8 and LP-DF8 with battery drill on correct torque setting. Ideal for large quantity installations. See install guides and video for correct use.

CT-20 Install tool Low Profile range (plastic)

For use with Low Profile range. Plastic moulded install tool for female clips LP-F8 and LP-DF8 with battery drill on correct torque setting. For standard use. See install guides and video for correct use. Designed for a maximum of 20 clip installations only. For more than 20 clips use the CT-19.

CT-12 31mm HSS Countersink drill bit with 10mm shank

To be used to countersink entry edge of hole (1-2mm) in hard materials such as MDF, hard plywood, fibre glass, plastic. Use when drilling holes for PC-M1B, PC-M2H, PC-VM1, PC-VMX, LP-M8, LP-F8, LP-DF8.

CT-18DG Drill guide installation jig for PC-RF1

Adjustable drill guide for use with the Standard Profile range. Designed for PC-RF1 mounting options.

MC-IT5 Install tool for metal clips MC-F5, MC-F10 & MC-M5

For use with Metal range. Use to install self tapping male MC-M5, also MC-F5 and MC-F10 into plywood or similar with battery drill on correct torque setting. See install guides and video for correct use.

CT-05 Panel removal tool

Stainless steel tool for removing upholstered panels. Not for use with painted panels.

CT-05H Panel Removal Tool with hook

Dual purpose reinforced stainless steel tool with fold down hook for use with lacquered and/or textured panels.

CT-17 Panel removal tool painted panel (glass sucker 40kg)

Glass suction cup for removal and handling of painted and pre-finished panels. Two glass suckers required for controlled panel removal.

CT-08 Yard kit 6 tools

Installation tools for Standard Profile range. Contains CT-01, CT-03, CT-05, CT-07, CT-09 and CT-10 in plastic box.

LP-08Y Yard Kit Low Profile

Installation and panel removal tools for Low Profile range. Contains CT-05, CT-09, CT-10 and CT-19.

CT-06S Service kit

For on-board and on-site maintenance of the Standard Profile range. Contains 14 x PC-M1B, 4 x PC-M2H, 4 x PC-SM2, 4 x PC-SM2H, CT-10 installation tool and CT-05 panel removal tool.

CG-50G SuperGroove Adhesive® Gun for 50ml Cartridge

SuperGroove Adhesive gun designed for use with CG-5010 SuperGroove Adhesive 50ml cartridge.