In the ATM zone a combination of the PC-F1A with the PC-M1A and PC-M2H from the Standard Range was used, according to the thickness of the panel. The PC-M1A was used with the 12mm panel, while the heavier 18mm panel was installed with the PC-M2H creating a totally secure fixing, while maintaining removability if panels needed repairing.
Used on the MDF feature paneling was the LP-DF8 and LP-M8 from the Low Profile Range. The LP-DF8 has been specifically designed for use with drywall/GIB, with its slightly deeper screw mechanism allowing the clip to mechanically engage with the material. The combination of the two clips created a superb flush finish, with minimal space between the drywall and panel. The use of Fastmount meant that the panel could be easily changed and replaced in a refit situation.